“Your skateboard can be maintained in a variety of different ways. You need to be aware of and take precautions to avoid skateboard pressure cracks at all costs. Our staff has compiled a few pointers about how to take care of your skateboard and, more specifically, pressure cracks on a skateboard and how to avoid them. In addition to that, we will discuss some of the most effective ways to maintain your skateboard in its entirety”
How Long Do Skateboards Last
The amount of time that a skateboard can be used can undoubtedly change depending on many different aspects. But, if you buy a brand new skateboard, it should last you at least a year, and depending on a wide variety of factors, it might even last longer than that. In general, though, skateboards are designed to last roughly a year. The lifespan of some people’s skateboards may be significantly less than that of others, while the lifespan of some boards may be somewhat longer.
The length of time that your skateboard will serve you depends on how you skate and your skating style. Whether you use your skateboard for things like commuting, riding on smooth streets, or simply regular riding, the lifespan of your board will undoubtedly be extended compared to if you used your skateboard for various tricks. A lot of popping, scraping, grinding, hammering, and flipping of the skateboard is going to be required of you if you want to perform tricks on your skateboard.
Your board will sustain minor damage due to each of these activities, which will, cumulatively, cause its lifespan to be reduced. But remember that this is an inherent characteristic of activity, and if it is the type of skating you aspire to perfect, you will need to be conscious of this fact and learn to live with it. You should pay attention to tricks if this is what you are involved in; moreover, you should be aware that performing tricks on the board will cause it to wear out faster than otherwise.
What Causes A Skateboard To Snap
A skateboard can break for various reasons, some more obvious than others. If the skateboard is the only piece of equipment you have for skateboarding, it will take a beating. Let us face it. But what exactly causes the skateboard to break when it does? Skaters of all skill levels can be responsible for some of the factors contributing to breaking a skateboard.
The inexperience that leads to incorrectly performing a trick is a common problem for beginners. When you fall incorrectly on the board, you risk cracking it. Those just starting out on skateboarding will acquire skateboards at a faster rate than those with more experience. If you are on the heavier or larger side, there is a reasonable probability that you will break more boards compared to those who are smaller. This is because larger and heavier people have greater force behind their movements. As a beginner skater, one of the most important things to remember is to show proper reverence for your skateboard. If you do not treat the skateboard with the proper amount of care, it is more likely to break or develop pressure fractures. That is why we discuss pressure cracks on skateboards and how to avoid them.
Skaters with much more experience also have more variables at play, which increases the likelihood that the skateboard will break. When performing skateboard tricks and feats, skateboarders with more experience will frequently apply more significant pressure on their boards. Skaters with more experience are more appreciative of their skateboards and can sense when their boards are about to crack or break on them. They are well aware of their skateboard’s capabilities and treat it with the utmost respect.
It is clear that skaters of any level, from novices to seasoned veterans, are capable of doing things that can create pressure cracks or breaks in their skateboards. Learn from your mistakes by noting what you did that led to a snap or pressure crack since this is the most crucial item to remember. In this way, you will be able to learn how to steer clear of such situations in the future.
What To Do If Your Skateboard Cracks
You need to take action as soon as you notice a chip or crack on your skateboard to prevent the damage from worsening. To get started, begin by removing any grip tape. After that, you are going to scrub the entire surface. If you do not have any epoxy on hand, one will need to go out and get some to fill in and seal the crack. Before attempting to utilize it again, make sure to let it a full day to dry out completely before you do so.
After the epoxy has had ample time to cure, you will smooth the surface using sandpaper with a beautiful grit. Repeat the cleaning process, and you will be ready to apply the new grip tape. Once everything has been put back where it belongs, you are prepared to get back on the road.
How To Avoid Skateboard Pressure Cracks
You could do several things to reduce the likelihood of pressure cracks appearing in your skateboard to the greatest extent feasible. In addition to the things you do with the board, you can also make specific changes to the setup itself to assist in preventing pressure fractures from appearing. Be sure that the nuts and bolts utilized to mount trucks to your skateboard deck are tight enough when you are putting it together.
You want to make sure that your hardware has enough breathing room. They can mitigate a portion of the impact caused by landing stunts. Using riser pads is yet another thing that can assist you in avoiding pressure cracks; nonetheless, you should ensure that you are utilizing the rubber varieties to have a superior feel. Before you ever step foot on the pavement, these two items can help you steer clear of the formation of pressure cracks.
Can You Skate A cracked Skateboard?
Caring For Your Skateboard
If you have the same enthusiasm for skateboarding as we do, you know how crucial it is to keep your board in the very best shape at all times. Hence, what can you do from the beginning to start caring for your skateboard so it remains in good condition? And how can you know about skateboard pressure cracks and how to avoid them? Water and excessive heat are the most damaging elements affecting a skateboard. Keep your skateboard inside an excellent, dry spot; ideally, this would be within your home. Most skateboarders keep their boards in their bedrooms, where the temperature is always perfect and there is no direct sunlight.
Water is one of the most damaging elements that can come into contact with your skateboard. If you can help, skate only on dry land and avoid skating in the water or rain. Please refer to this page for instructions on what to do if the deck of your skateboard becomes flooded. You must perform routine maintenance on your bearings and sand down any chips and splinters that may have formed.
Maintaining the cleanliness of your skateboard will also be beneficial in terms of extending the lifespan of your skateboarding setup. If the grip tape on your grip starts to peel, you should clip it, so it does not put you in a dangerous scenario. Replacing any components that have become worn or appear to be operating below their potential is essential.
Steer clear of temperature extremes; you would not want to perform skating in conditions when the temperature is either exceedingly high or incredibly low, so avoid both. You are well aware that the deck of your skateboard is constructed of wood and that this will undoubtedly affect how long it lasts. Lastly, but most importantly, show some respect for your skateboard. When you ride or perform tricks on your skateboard, if you respect it and stay consistent with its maintenance, it will look out for your safety. Happy skating!
FAQs
What causes pressure cracks on skateboards?
Pressure cracks are caused by stress on the skateboard’s deck, which can be caused by improper maintenance or use. Poorly set up trucks, using wrong size wheels and playing aggressively can all cause excess stress that leads to pressure cracks.
How do I avoid getting pressure cracks?
To avoid getting pressure cracks, it’s important to make sure your skateboard is properly maintained and setup. Make sure the trucks are tightened correctly, check the wheel size for compatibility with your board, and always play safely and within your abilities. Additionally, store your skateboard in a cool and dry place when not in use to prevent unnecessary wear-and-tear.
Can pressure cracks be fixed?
If a pressure crack is caught early, it’s possible to repair the damage with special epoxy or glue. However, if left alone for too long, the crack may become too large and cause structural instability. In this case, it is best to replace the entire skateboard deck.
What are the signs of a pressure crack starting?
The first sign of a potential pressure crack is usually an area on your board that feels softer than normal when you press on it with your finger. Another indication is a popping sound coming from your board while riding it. If either of these warning signs occurs, immediately stop skating and inspect your board for signs of damage.
How can I prevent pressure cracks from happening in the future?
The best way to avoid pressure cracks is to make sure you are using the correct size wheels and trucks, as well as keeping them properly tightened. Additionally, take care not to play too aggressively or attempt tricks beyond your skill level. Finally, store your skateboard in a cool and dry place when it’s not in use. Following these steps will help keep your board safe from pressure crack damage for years to come.
Conclusion
I have discussed various ways to know pressure cracks on a skateboard and how to avoid them. These tricks help you on the way of taking care of your skateboard and increasing its lifespan. If you pay attention to how you use your board and notice even the tiny cracks in it, you can avoid it from breaking by practicing the above methods.