The 10+ Best Longboard Bearings in 2023

The most important part after the trucks is the beatings in the longboard. If you want to have a smooth ride, you need to select the best longboard bearings for your comfort. Now you can roll on quickly and at speed. 

There is a lot of variety in the types of longboard bearings. There are different types and kinds available in the market to make your ride smoother. While riding, you will be able to see magnificent differences by choosing the best longboard bearings. 

Skatevella.com is here for you to help you select the longboard bearings for you. If you are a beginner or expert, this article will facilitate you in every way. 

Top 10 Best Longboard Bearings

1. Bones Reds Skateboard Bearings-Top on the List

 There are different models for the bone bearing, but Bones Reds Skateboard Bearings are the perfect longboarding accessory for riding your longboard in comfort.

If you want to be sure that you are getting the right kind of bearings for your board, it is advisable that you first get yourself an accurate longboard bearings guide. 

The balls of the bearings are made of steel which makes them affordable as compared to the ceramics.

The lubricants you need to soak them in can be  Speed Cream by Bones. The best thing you can do to your bearings is to make them clean with acetone.

The shield is made of rubber and can be cleaned easily. The bearings also have a nylon ball, making them the strength worthy, and now they will be good for which is suitable for riding gaps, curbs, streets, rails.

The set comes with eight washers and spacers. These bearings are compatible with ABEC rating system 7, but they are not incorporated with them. 

The best longboard bearing’s size measures 22 mm and 7 mm width, and 8 mm Inner diameter.

The best way to describe Bones Reds Skateboard Bearings is dependable, long-lasting, durable, cheap, comfortable, and fun.

All of those things are true, and that is why they have been Bones Reds’ target from the very start. They offer high-quality products at affordable prices so that everyone gets to enjoy a smooth, fun skateboard ride.

In addition, the company has released a couple of other products that will further expand their already huge customer base, including the Bones Up Pro Deck Trac and the Big Stop Pro Trac.

2. Bronson Speed Co Bearings- Trending

It would be wrong to say that Bronson speed co-bearing gives a tough competition to the Bones Reds bearings. The best definition that you can give to them is a quality product that you will never regret buying, and that will always meet its promises.

And true to their words, in terms of quality, these bearings are some of the best you can get. Here’s another thing that you should know about these long-lasting best longboard bearings. 

The G2 and G3 bearings in the Bronson speed bearings with a standard size of 608 are the best for downhill and high-speed longboarding.

The riders are now free to use them over rough surfaces because they do not get dirty easily. In case they are dirty enough to clean, they require little cleaning. 

There are protective shields on both sides of the bearings that help to maintain the quality of the bearing. Comparatively, they are softer than Bones Reds. They are great at keeping the small dirt particles and stones away. 

The main difference between the G2 and G3 is the quality. These G3 bearings are pre-lubricated and come with plastic packing.

At the same time, the packing of G2 is of simple paper and is not lubricated. The G3 works better than the G2 in performance.

Enjoy your smooth rides!!

3. Zealous Bearings for Longboards – Easy on your pocket. 

Another steel bearing is on our list. The green rubber in color will keep all the dirt and garbage away from it as the best longboard bearings are of the standard size 608, so as the zealous bearings. The measurement of the bearing is like a pro.

The inner races are extended while the axle hole is 8 mm only. Moreover, the speed rings, washers, and spacers are 0.5mm. The zealous bearings will make you feel like a ride in the air. They are making it a breezy ride. 

All the items in these bearings are built-in, so you do not need to worry about installing these bearings. If you are still in speed, you will maintain your speed, and these products will not wear away. 

Talking about lubrication, these bearings come with packed pre-lubricant. The archival nano-ceramic grease is used to reduce the friction with the surface making the ride smoother.

The washers and spacers are built-in attached to the wheel. These spacers make the wheel heavier. 

Coming to the incredible feature, these bearings are very easy to install and incredibly durable, and they are not creating any pressure on your pocket. Cleaning will not be any problem for you. 

These bearings will soon break in around a week. But once it is done, no one can stop you from making the smoothest rides. The fast-rolling of these bearings will make your pro rides easier.

4. Yellow Jacket Premium Bearings-Colorful Variety

These yellow jacket premium bearings are on the list of best longboard bearings because they fit in many types of longboards, Skateboards, Inline Skates, Rollerblades, Electric Skateboards. These are the most compatible with the different boards than the red one. 

Coming to the lubrication of the bearings, they are pre-lubricated. The high speed of these bearings is guaranteed because of the Ultrafast lube.

The shields of these bearings also protect the lubricants. The yellow jacket means that the lubricants are protected with this yellow shield around bearings, protecting the contact with wheels. 

Along with that, they are incredible for skating and downhill skating in terms of speed. 

An attractive yellow color is used for protection and making the look also attractive. The shield protects your bearings from dirt, rocky surfaces, dust, and little particles stuck inside. This will extend the life of these bearings, and maintenance becomes easy. 

The installation of these products is our hands-on experience. It is very simple and comes with the spacer in the package. 

The one dislike about these bearings is they sometimes become noisier. But after light adjustment with the fitting of these b earrings, it will become easy. 

The company claims to check each product before packing the material. That is why they offer a 100 percent money-back guarantee if the customer is not satisfied with the product. 

5. Fireball Dragon Precision Bearings-Easy at Installation

Firefall dragons are here for you with hot packages and contain the standard size 608 bearings. Hence come with a 100 percent guarantee of the company.

The size of the bearings is an outer diameter of 22mmz, the width of 7mm, and the axle of 8mm. If any of the customers are not satisfied with the product, they can replace their product.

Coming to the lubrications, they have light oiling on the bearings for regulating the high speed. But if the matter is about maximum durability, then apply the heavy, greasy material. 

These are very easy to clean. Fireball Dragon Precision bearings can be open cleaned and rebuilt. There are rubber bearing shields in the bearings, and they are easy to remove.

There is a double shield on both sides of the bearings covering the best longboard bearings from dust, small particulars, rough surfaces, and dirt. These shields provide a maximum shield. The cleanliness makes them durable and long-lasting. 

Moreover, the installation is an easy process. You just need to install them once. 

These bearings do not have sideways rattles. So while sliding, they have horizontal pressure. These bearings can be used in the best longboard bearing for downhill riding. 

6. Bones Ceramic Super Reds Bearings-Cheap over the Pocket

This is another incredible piece of bearings from the Bones red-bearing series. They are manufactured in China. They are making them cheaper and the fastest longboard bearings and still making them the best quality and best longboard bearings.

If you want to have smoother rides and durable bearings, these are ones for you. The bearing size is the standard 608 and measures 22mm (outer diameter) x 7mm (width) x 8 mm (inner diameter/axle). 

The balls in the bearings are made of ceramic, as it is clear from its name. 

Ceramic bearings are waterproof and light in weight. But the lightweight does not exhibit its strength; these are super bearings with super strength. They are more durable than steel bearings. 

Moreover, the rubber band is only on one side to shield it from dirt and dust. But the rubber is easily removable to clean the bearings and ball bearings. The rubber shield wall produces less friction.

At the same time, the bearings come in packs of 8 with pre-lubrications. These lubricants are the speed cream racing lubricant. There are no spacers in one side bearings. They do not create any noise and are durable also. 

They can easily go on hard surfaces with super smooth rides. The Bones Ceramic Super Reds Bearings need lubrication because they get dirty easily, and the reason is the one shield rubber. 

7. CCS Premium Blue Steel Bearings- Famous

The bearings come with the ABEC 7 rating. If you want the compatible bearings to Bones Reds with ABEC 7 rating, these are the best selection for you.

CCS is also the best company on the market. They are known to produce the best quality at low prices. These bearings are available in the seven chrome steel ball bearings. 

The package comes with pre-lubrication and results from a smooth ride. The speed of the bearings is very fast and can go above 30 speeds. They are pocket-friendly and very much durable. 

The dimensions of the eight steel ball-bearing package are 4.5 x 4.3 x 1 inch; 2.4 Ounces. 

The shields are double-sided, and blue and blue steel bearings are the choices of everyone. Resulting in making them elegant and classy. 

These shields are from the double side, making them easily removable and easily cleanable, and the maintenance becomes very easy from dirt and dust.

Another important feature is that these bearings do not require washers and spacers. The spinner of the ball bearings is very strong. These bearings are valuable for spinning.   

8. Neal Precision Skate Bearings-Excellent Spinning

If you are looking for the best longboard bearings for cruising, you are here at the right place. This one is for sure for you. This bearing comes with a spacer, the ultimate one for a fast ride. If you are keen to have a fast ride, then you need to have them.

They provide you with a spin rating of 100,000 rpm, the maximum level. And are extremely durable at high speed also. The standard size of 608 RS. The spinning is fast and complete without noise. 

The material used to make these bearings are aluminum and steel. The bearings have removable rubber shields that are easy to open and protect from dust and dirt.

In this packaging, there are different types of bearings. Blackout Ceramic bearings stand out in all of them. The ceramic bearings are long-lasting and durable. The ceramic bearings are good, and they do not get rusty. 

The bearings mentioned above do not require any break-in period. We recommend you use them if you are looking for smoothness. These can be lubricated at any time. 

Cleaning for any bearing is essential. Just re-lubricate the bearings, and you will be able to clean them. Moreover, maintenance is easy, and you just need to be consistent in it.

The package has additional items for you as well. They have an aluminum casing that can be re-use along with the pacers and stickers. 

9. Heady Shake Pro Longboard Bearings- Spinning for More than 2 Minutes

Heady Shake Pro Longboard Bearings are coming with the ABEC-9 Rating along with the size of 608RS skate bearings.

These are lightweight bearings more in strength than steel. The material in the bearings is titanium. They are long-lasting, durable, and the best longboard bearings for cruising.

The package comes with pre-lubricated bearings resulting in a faster and smoother ride. You will be able to spin for more than 2.5 minutes, and you will not get bothered with kicking it off.

You are resulting in the best longboard bearings for cruising. There is a special type of lubricant used that makes sure you have a fast and smooth ride. 

It was now coming towards the protection, so there was a rubber shield on the single side. This protects the bearings from one side and causes less friction.

They need maintenance frequently because of the dirt particles and dust from the harsh surfaces. We assure you will have a quite comfortable experience with these bearings. 

The company provides a 100 percent money-back guarantee in case the package is damaged. These bearings have incredible craftsmanship and bearings are waterproof and come with four spacers as well. 

Best Longboard bearings are compatible with the different types of boards and riding styles. These include inline and roller skates, longboards, skateboards, and kick scooters.

10. Bones Super Swiss 6 Bearings- For a butter Smooth Ride

If you have a good budget for buying the best longboard bearings, this is the best selection. These are the most smooth and easy-to-go bearings.

They are not noisy, and either will make you more comfortable with the ride. The package is seven balls. They are known for their faster speed. 

The size of these bearings is the standard 608 sizes. These are 8mm in diameter and the outer diameter 22 mm.

Moreover, the package includes the pre-lubricated bearings with bone speed cream results making them faster and stronger. 

The single shield made of rubber is a non-contact shield and makes the rides smooth, just like butter. The quality makes them durable and long-lasting for life. 

Installation is also super easy with the tools of the same company. It will not do any damage to the bearings. 

The balls of these bearings are made of nylon that is long-lasting and smooth as well. 

Guidelines for Buying Best Longboard Bearings

Before buying anything, the buyers must go through the important features of the product. Bearings have minor parts inside and outside.

It’s important to know what to look for in bearings and exactly which ones to get because not all are made equal. A guide can help you pick the right bearings for your board and help ensure that you get the right price, so you don’t end up with something that isn’t right for you.

These details parts are appended below:

• Balls
• Races (inner and outer)
• Retainer cages 
• Shields

Select Best Material of the Ball

To have a good spin, smooth ride, excellent speed, and spirited ride, you will have to select the best longboard bearing balls for yourself. The balls of the bearings need to be of incredible quality and specifications. 

Different materials must have different duties to do. There must be different options for cruising, downhill racing, and riding through rough surfaces. 

Steel:

If you are a beginner, the steel ball bearings are best for you, like a pro. The steel balls heat up when you are riding. The heat is generated along with the elasticity and heavy load.

Heavy riders will enjoy their rides because they are incredibly strong and cannot crack easily. They are easier on your pocket. 

Ceramic:

You need these balls if you are a keen downhill rider. There is no effect of heat on these balls. If they are not used with care, they can be cracked easily. They are a little more expensive than the prior ones.

Size of the Bearings

The standard size of the bearing is 608 bearing size for both skateboard and longboard bearings as well. `Following are the standard measurements for these. 

• Outer diameter is 22mm 
• Width is 7mm 
• Inner diameter/axle is 8mm 

The Standard size of the bearings mostly fits in all of the longboard and skateboards.

ABEC Rating System

First of all, you need to understand the ABEC rating system for both the longboard and skateboard. What and why is this rating system used? 

Annular Bearing Engineers Committee (ABEC) is a machine-bearing rating system. This is applicable on machine bearings rather than skateboard and longboard bearings. It is concerned with the revolution of the wheel per minute.

Most of the brands do not use this rating system. Each one has its own designed system to mark the load over these skates and longboards and the resistance. 

Some traditional companies also rely on these rating systems, and we suggest you consider this rating system while purchasing any bearing balls. 

The Spacer of the Bearings

The washer or the spacer is for the space between the truck and the axle of the longboard. They are a very important part of the longboard for good placement of the bearings and the wheels.

This will make the setting tight, and the longboard will not give an open space while riding. They keep the bearings tight. The standard size of the washer is ½ inches, and experts also recommend it. 

Pre-Lubrication 

The companies lubricate the bearings we buy. They are pre-lubricated before use. Therefore, the reason that these bearings are super fast and spin fast.

You just need to get them out, install and use them. But all are not the same, so any other bearing that is not pre-lubricated needs to be lubricated first. 

Lubrication Types

For a smooth ride, several lubricants can be utilized for the bearings. If you use thin lubricants, the friction between the bearings will increase.

If you have purchased the pre-lubricated bearings, the experts suggest using the same type of lubricants for it again. 

Best Lubricants for the Bearings

There are two most essential and commonly used lubricants for the bearings. 

• Speed Cream
• Nano-ceramic grease.

Bearing Shields

As the name says, it provides the shield for the bearings. This is a wall type of structure that averts the dirt and debris from the surface of the bearings.

There are bearings with the double shield also. This makes the bearing protected in every way. These shields are available in two different types of material.

One is made of rubber, and the other ones are of metal as well. So the bearings made of rubber can be placed aside for cleaning easily. While the metal ones are fixed, maintenance becomes difficult.   

Understanding of Built-In Bearings

Some bearings are ready for installation. Brands like Zealous Bearings or Heady Shake Bearings have such these. They have been pre-built with spacers and speed rings.

Installation can sometimes be difficult, so you can try these built-in bearings if you are a beginner or are not keen on installation. It will help you to start longboarding easily. 

The Installation Process for Bearings

Don’t worry about the installation of the best longboard bearings. The installation is simple and doesn’t confuse spacers and washers.

There are four wheels for the longboard, and each wheel requires two bearings. So get a set of 8 bearings. The placement of spacers and washers will be placed in the axle. The clean bearings will provide fast spinning.  

The installation of these bearings must go step by step from the axle, the truck hanger, to the axle nut.

1. Speed ring (washer)
2. Bearing
3. Spacer
4. Bearing
5. Speed ring
6. Axle nut
7. Bearing Shields

Final Verdict

No one is going to decide the selection of bearings for you. You are the one who knows your style of riding and preferred speed limits.

If you ask an overall opinion, we recommend that the best longboard bearings be of the Bones Red company. If you want to be easy on your pocket, get any of the selected from our list. Or try Neal Precision Skate Bearings. 

Apart from the best longboard bearings for longboarding, several other kinds of bearings could transform your ride. There are zealous bearings, minimal friction bearings, self-leveling bearings, and bearings with seals.

You should first determine if you want a self-leveling bearing. It will help you eliminate most of the bumps when you are down on the slopes; this way, you will not be experiencing sliding while going downhill.

Other types of best longboard bearings are zealous, ceramic, and rim nuts. Zealous bearings have high speeds, and so they are for flatlands.

In addition to using flatlands, zealous bearings can also be used on the edges. Ceramic bearings provide smooth rides, and these are generally used by people who like to go fast and want to minimize friction whenever they ride.

(FAQs) Related to Best Longboard Bearings

1. What is the best material for longboard bearings?

There are five different kinds of bearings, but the best longboard bearings are ceramic ones. Ceramic is waterproof and tough, so it results in a long-lasting effect on the longboard. 

2. How do you pick a longboard bearing?

The longboard bearing has its ranking system, ABEC rating tends. This is based on the performance and speed of the longboards. The higher the ranking, the faster they could be. The recommended ones are seven or nine ABEC ratings to find the fastest options

3. Do bearings matter on a longboard?

Bearings that have a higher ranking use excellent lubricants and quality material. The bearing’s performance determines the ride quality as well. 

4. What are the fastest bearings for skating?

The fastest longboard bearings and are famous among the riders. Skatevella will recommend Bones Bearings, Zealous Bearings, Bronson Bearings and Sabre Bearings. But the most important thing is the cleaning and maintenance of these bearings.

5. What bearings do pro skaters use?

• Bones Swiss Ceramics Bearings.
• Super Swiss 6 Competition Skate BearingsBones .
•  Ceramic Reds by ones
• Bronson G3 Single Set.
• Yellow Jacket Premium.
• Bones Bearings Super Reds.
• Spitfire Burner Bearings.

6. Is ABEC 11 real?

The answer is no. The Ranking system ABEC, Annular Bearing Engineering Committee varies from 1-9. 

7. Are ABEC 9 bearings good?

The higher the number of the ranking the smoother and good are the bearings. But the ABEC 7 is good to use. The ABEC is not a wise choice to use. 

8. Is Timken a good bearing?

Timken Bearing and Hub Assembly are durable, reliable, and increase performance. Installation is very easy. Moreover, the ECCPP Wheel Bearing Hub is budget-friendly.