Why Is My Skateboard Heavy- Reasons and Solutions

Have you ever questioned why is my skateboard heavy like it could double as a dumbbell?

You’re not alone. Many riders have asked the same question, and we feel ready to provide an answer that will surely surprise even the most experienced skaters.

By going into detail about all its components, this blog post aims to explain what causes those heavy boards – and, more importantly, how they can be lightened up for a more effortless riding experience.

 Let us take a look at these answers together.

Why Is My Skateboard Heavy?

If you’re finding that your skateboard seems heavier than usual, there are a few possible explanations. For starters, the deck itself might contribute to this extra weight – maple decks tend to weigh more than their lighter counterparts.

Additionally, trucks and wheels can put on some unwanted pounds too: if they’re not lightweight enough for optimum maneuverability, it could explain why riding feels harder lately.

Even aftermarket parts such as bushings or risers should also be considered when assessing whether a board feels heavy or light. 

Ultimately though even with all of these factors in mind. It’s up to individual skaters what set-up works best for them, whether preferring added stability from something heftier or looking towards easy mobility through featherweight components. 

Experiment away until you find just the suitable customized ride.

Heavy vs. Light Skateboard

Skateboards come in two different forms: heavy and light. Heavy skateboards are constructed from hardwood or composites, granting them hefty durability, perfect for a street skater’s demanding lifestyle

Though they might be resilient to physical stress, their bulkier size makes maneuverability an issue that beginners should take note of. 

Lightweight boards crafted with aluminum or polycarbonate tend to make performing tricks simpler; however, this convenience is compromised when it comes time for the board’s durability to withstand wear and tear over time. 

Choose your weapon accordingly.

What Factors Affect The Weight Of A Skateboard?

Skateboards come in a variety of shapes, sizes, and weights, all determined by the materials used to construct them.

A standard board is 30-32 inches long with an 8.5-inch width for both its nose and tail end; size does matter when it comes to weight, as more extended decks typically weigh more than their shorter counterparts. 

From wood options like maple that are known for strength but can add increased heft or lighter woods such as bamboo, which often sacrifice durability.

It’s ultimately up to individual preference and riding style what material gets picked out. 

Finally, another factor influencing skateboard weight: is trucks & wheels; heavier sets result in greater overall mass, while lighter ones offer quicker acceleration if you’re looking for something fast on your feet.

How To Reduce The Weight Of Your Skateboard?

Take your skateboarding performance to the next level by reducing the weight off of your board. For minimal cost, removing grip tape can shave a few ounces without impacting its function

However, if you’re willing to spend more for more significant effect, look into alternative materials like carbon fiber and composite, as well as smaller deck sizes that will lighten up even further

Regardless of which route is taken – or skated. – make sure it’s best suited for refining both style and speed on any terrain.

What Are The Benefits Of Reducing The Weight of Your Skateboard?

Skateboarding is a prevalent mode of transportation, and while it might seem simple enough, proper maintenance is critical. For skaters who are looking to maximize their Board’s performance, reducing its weight can make all the difference. 

By removing unnecessary components such as trucks or wheels and replacing them with lighter options, you will see improved speeds when maneuvering around town, plus better tricks thanks to a board that’s significantly easier to carry.

How To Make Your Skateboard Lighter Without Sacrificing Performance Or Durability?

Would you like to experience a lighter, smoother ride? Here are some tips for making your skateboard more agile without compromising its performance or durability. 

Invest in lightweight trucks and deck material such as carbon fiber, which is light yet strong. Roll faster with thinner wheels that provide superior grip, and select a smaller board size to reduce weight even further. Now it’s time to hit the streets.

Is A Heavy Skateboard Good?

While the choice of skateboard weight might seem trivial, it certainly impacts your riding experience.

Lighter boards offer more maneuverability and control at higher speeds – making them a great all-rounder. 

Still, if you’re after some serious air time doing ollies or airs, nothing beats the stability and pop provided by heavier decks.

While they may be harder to carry around, heavy skateboards provide formidable durability that can easily handle any punishing grinds, giving riders greater confidence when trying out those big tricks.

Heavy Skateboard Decks

Skateboarding can be hard on your equipment, so it pays to have a board that’s up for the challenge.

Heavier decks offer several benefits not only are they more resistant to impact damage and warping at higher speeds, but their solidity also provides an extra bit of confidence when you’re skating

So if you want to stay ahead in skateboards, don’t rule out beefier boards.

Heaviest Skateboard

In 2023, a team of engineers stunned the skateboarding world by creating an extraordinary feat of engineering—a 1,000+ lb. behemoth that defied expectations and beliefs about what is possible with a skateboard.

Despite its weight, this massive board was ridden successfully for some distance by one brave professional skater.

It may not have been the most sensible ride ever attempted, but it will undoubtedly go down in history as one of the most extraordinary attempts at pushing boundaries.

Tips For Maintaining The Performance And Lightness Of Your Skateboard

If you want your skateboard to glide like a dream, it is essential that its weight remains low. Heavier boards can be difficult and tiring to manage

To keep yours light as air, consider using lighter-weight parts such as decking and wheels when putting together or upgrading the board -but don’t forget about unnecessary items too. Flashy graphics? 

Leave them out of the equation; they will only add extra pounds while taking away from the performance.

Additionally, clean off those grime bits often so dirt won’t weigh down on your ride’s power.

Put these tips into practice for an effortless skating experience every time.

Reasons Why Your Skateboard May Be So Heavy

Attached Hardware

Ensure the weight of your skateboard is just right. Too light, and it won’t perform as expected; too heavy from trucks, bearings, wheels, or water exposure could make it a challenge to carry around.

If you’re skating in wet conditions, take extra care – keep that board dry for optimal performance.

Wide Wheelbase

To offset the skateboard’s bulkiness due to its wide wheelbase, consider having your trucks adjusted in closer proximity. This way, you can create a fulcrum nearer to the middle of the board and achieve a better balance with less weight.

Bearings Clogged With Dirt

Skateboarding is the quickest way to get around town, but it can become a slow and arduous task if your bearings need to be addressed.

When dirt builds up on the wheels’ bearings, they start weighing them down – aborting any chance of achieving optimal speed.

Don’t let sluggishness drag you back – clean those vital components regularly for smooth sailing each time out.

Wrong Skateboard

Navigating the skatepark can be a balancing act, so make sure to pick your board carefully. Your ankles need to firmly support that weighty deck – if it’s too heavy for ya, you’ll struggle and risk messing yourself up. 

Be aware of both your body size and feet measurements when selecting a ride; heavier builds require sturdy boards equipped for the job.

Improper Balancing

An unbalanced center of gravity can make maneuvers difficult and potentially dangerous when skateboarding. By ensuring each component is evenly distributed on your board, you’ll maintain a steady balance. 

No matter how daring the trick or fast the ride. With balanced weight distribution in place, you’ll be able to easily feel when something isn’t quite right with your ride – giving yourself extra confidence while tearing up those ramps.

Conclusion

Whether you’re a master of the streets or an aspiring Tony Hawk, having your skateboard tailored perfectly to your needs makes all the difference.

Knowing what’s contributing to its weight can help you optimize it for smoother and faster performance. 

From adjusting panel size according to trucks’ strength and competence level to checking wheel widths – we’ve got some great tips on improving overall feel, so get in touch with us if you have any questions. Skate easy, peeps. 

FAQs

Why is my skateboard heavy? 

Your skateboard may be heavy because of the materials it’s made from or because of added components like grip tape or extra trucks.

If your board is made from a heavier material like wood, it will naturally weigh more than something made with plastic or lighter materials. 

Furthermore, components like extra trucks, large grip tapes, and heavy wheels can also contribute to a heavier skateboard weight.

If you’re looking for ways to make your board lighter, consider switching out some of the heavier parts or opting for a lighter material when possible. 

What is the best way to reduce the overall weight of my skateboard?

The best way to reduce the overall weight of your skateboard is to choose lighter materials when available and replace components that add extra weight.

For example, opting for a board made with lightweight plastic or aluminum instead of wood or choosing lightweight trucks and wheels instead of heavier ones can help significantly reduce your skateboard’s overall weight. 

Additionally, removing extra grip tapes and other components that add unnecessary weight can also help make your board lighter.

How much does a typical skateboard weigh? 

The weight of a skateboard can vary significantly depending on its size, materials used for construction, and any additional parts or components added.

On average, a typical skateboard weighs between 2-6lbs (1-2kg). 

Smaller boards tend to be lighter, while larger boards may be heavier due to their increased size and extra components.

The weight of your skateboard can also vary depending on what type of material it’s made from.

Boards made with wood or metal are usually heavier than those made from plastic or composite materials. Lastly, extra grip tapes and components like trucks, bearings, and wheels can also add to the overall weight of your board. 

Can I make my skateboard lighter without sacrificing durability? 

Yes, you can definitely make your skateboard lighter without sacrificing durability. The most common way to do this is by using lightweight materials and components.

Additionally, choosing lighter trucks and wheels with fewer bearings can also make your board lighter without compromising its performance.

Finally, removing any unnecessary grip tapes or other components that add extra weight can also help you achieve a lighter and faster skateboard.

Ultimately, finding the balance between lightweight materials and components that are still strong enough to provide good stability when riding is important.

You can make your board lighter by carefully selecting your parts and components without sacrificing performance or durability.

Please share this: